Getting Started with Your DJI Osmo Action 5 Pro & Multifunctional Charging Handle

Welcome! Here's a quick guide to help you confidently use the DJI Osmo Action 5 Pro camera and the Multifunctional Charging Handle. Your camera comes fully set up, charged, with a microSD card inserted—ready to shoot right out of the case.

🎥 CAMERA OVERVIEW: DJI Osmo Action 5 Pro

📦 Key Buttons and Ports

• Shutter/Record Button (Top Right)

  • Press once: Take a photo or start/stop recording.

  • Press and hold (when off): Instantly powers on and starts recording (SnapShot mode). The camera auto-powers off if left idle for 3 seconds.

• Quick Switch Button (Left Side)

  • Press and hold: Power on/off.

  • Press once: Switch shooting modes. During recording, press to mark a highlight in your footage.

• Touchscreens (Front & Back)

  • Show live view, mode, battery, and SD card status.

  • Tap to change settings or playback footage.

  • Swipe Down (from top): Control menu (brightness, orientation lock, voice control, etc.).

  • Swipe Left/Right: Switch between Photo, Video, Timelapse, etc.

  • Swipe Up (from bottom): Adjust resolution, aspect ratio, etc.

🧭 Touchscreen Tips

• Tap the icons to adjust settings or access recorded media.

• From the top swipe menu, you can:

  • Lock screen

  • Enable Voice Control

  • Switch front/rear screen

  • Manage brightness and more

🎮 MULTIFUNCTIONAL CHARGING HANDLE OVERVIEW

This handle is more than just a grip—it extends battery life, adds control buttons, and includes a microphone port and tripod stand.

🔘 Handle Button Functions

• Power Button

  • Press and hold: Turn the handle on/off.

• Quick Switch Button

  • Press and hold: Turn off the camera.

  • Press once: Turn on the camera or cycle shooting modes.

• Shutter/Record Button

  • Press once: Take a photo or start/stop video (only works when connected to the camera).

• C Button (Custom)

  • Press once: Switch between front and back screens (single-screen preview).

🔌 Ports and Features

• USB-C Connector (Top) – Connects to the camera for charging and control.

• USB-C Charging Port (Back) – Used to charge the handle itself.

• 3.5mm Mic Input (Back) – For external microphones (TRS only).

• Foldable Tripod (Bottom) – For stability in static shots.

• Status LED Lights – Show current battery level or charging status.

🔋 Charging Notes

Charging the Camera:

1. Make sure the handle is powered on.

2. Connect the USB-C plug from the handle into the camera’s USB-C port.

3. The camera will begin charging automatically.

Charging the Handle:

1. Open the USB-C port cover on the back of the handle.

2. Plug into a compatible charger (DJI recommends PD chargers).

3. LEDs will indicate charging progress.

💡 LED Indicators on Handle

• LEDs light up to show remaining power.

• Flashing LEDs indicate charging.

• If all LEDs flash rapidly, the temperature may be too high or too low—let the handle return to normal temp.

🎤 Using External Microphones

Plug a 3.5mm TRS microphone into the port on the back of the handle.
Note: Headphones are not supported. Handle must be powered on for mic to work.

That’s it! This setup is designed to be plug-and-play, but gives you the freedom to tweak and explore. If you’re ever unsure, refer to this guide or the included manuals. More help articles are available for advanced features.